Best Snowboard Stomp Pads (2026)
A stomp pad gives your free foot grip when you ride off the lift or skate across flats. Here are popular pads and how to install one.
Why Use a Stomp Pad?
When you get off a chairlift or skate across flat sections, your back foot is unstrapped. A stomp pad gives that foot grip on the board so it doesn't slide off, which is especially helpful for beginners.
Crab Grab Shark Teeth
Best all-round stomp pad
- Shark-tooth spikes bite into boot tread
- Flexible CRUBBER material
- Groove gills for cutting and custom placement
Crab Grab Mini Shark Teeth
Best small pad
- Shark-tooth spikes
- Flexible CRUBBER
- Compact size
Crab Grab Crab Trap
Best lightweight pad
- C-Foam construction
- 22 holes to grip boots
- Peel-and-stick
Stomp Pads Compared
| Pad | Material | Highlights |
|---|---|---|
| Crab Grab Shark Teeth | CRUBBER | Shark-tooth spikes, groove gills |
| Crab Grab Mini Shark Teeth | CRUBBER | Smaller version |
| Crab Grab Crab Trap | C-Foam | 22 holes, lightweight |
| One MFG Game Boy | Thermoplastic | Molded 7mm spikes, 6" x 5" |
The Best Stomp Pads
1. Crab Grab Shark Teeth
Shark-tooth spikes bite into boot tread, while CRUBBER material flexes with the board. Groove gills let you cut and customize placement, and the compact size fits most stances.
Good to Know
- Strong grip
- Flexes with your board
Watch Out For
- Place carefully; it's sticky
2. Crab Grab Mini Shark Teeth
A smaller version with the same shark-tooth spikes, CRUBBER material and groove gills.
Check Price on Amazon3. Crab Grab Crab Trap
Lightweight, grippy C-Foam with 22 holes to catch your boot, in a peel-and-stick design.
Check Price on Amazon4. One MFG Game Boy
A thermoplastic pad with molded 7mm spikes in a fun 6" x 5" retro handheld-game shape.
Check Price on AmazonDo You Need One?
Not always. Stomp pads help most if your board has a glossy, slippery topsheet or you're new to getting on and off lifts. Boards with textured topsheets, and riders confident with one foot free, may not need one. They're inexpensive, light and add a bit of confidence.
Where to Put It
Most riders place the pad just in front of, or right next to, the back binding, where the free foot naturally rests. Stand on your board with your back foot unstrapped to find the spot before you peel the backing.
Materials and Alternatives
| Type | Notes |
|---|---|
| Rubber | Flexible, conforms as the board bends; good for park riding |
| Foam | Light, easy to trim, usually cheaper |
| Metal studs | Individual studs you arrange in a pattern |
| Traction rails | Thin strips beside the binding for a minimal look |
How to Install
- Stand on your board and find where your back foot rests naturally.
- Clean and dry the topsheet.
- Apply at room temperature and press firmly.
- Let it set as directed before riding.
Installation Tips
- Install indoors at room temperature; cold boards and adhesive don't bond well.
- A hairdryer can gently warm the board and adhesive for a stronger bond.
- Press firmly from the center out to remove air bubbles.
- Let it cure overnight (or as directed) before riding.
More: how to snowboard, snowboard bindings and stance and binding angles.
Frequently Asked Questions
What is a stomp pad?
A traction pad stuck to your snowboard between the bindings, giving your unstrapped back foot grip on lifts and flats.
Where should I put my stomp pad?
Usually just inside the back binding, where your free foot naturally rests. Test the spot before sticking it.
How do I apply a stomp pad?
Clean and dry the topsheet, apply at room temperature, press firmly and let the adhesive set before riding, following the maker's directions.
Do I really need a stomp pad?
Not necessarily, but beginners often find it helps them control the board getting off lifts.
Can I remove a stomp pad?
Usually, with care. Gentle warmth can help soften the adhesive; residue can be cleaned off.